Categories

Search in Blog

Information

Specials

Top sellers

Manufacturers

CLAP INTER CELL

CLAP INTER CELL

 (5)    0

  IDEA ELECTRONIC PROJECT

This is a relay controlled by the sound: clapping puts the relay into the working position, another rest position. The relay contacts can switch electrical devices up to 2000VA.
This circuit is powered by a 9 volt battery which delivers current in its relay resistance lorqu'il is in working position. Under heavy utilsation, provide AC power for the battery runs out quickly.


NOMENCLATURE :
code number designation
1 R1K resistance 1 / 4W 1KR
1 R2K2 resistance 1 / 4W 2.2KR
2 R10K resistance 1 / 4W 10kr
1 R82K resistance 1 / 4W 82KR
1 R100K resistance 1 / 4W 100kr
2 R1M resistance 1 / 4W 1MR
1 AX2M2 axial condenser 2,2MF / 63V
1 1N4007 diode 1N4007
2 2N2222 NPN transistor 2N2222
1 LM741 op amp 741
1 4049 IC 4049
1 PRES pressure for 9V battery
1 1RT6V relay coil 1RT 5/10 V
1 MINI1RT miniature single inverter
1 micro-electret ELECT

MOUNTING
Drill the circuit board 0.8mm, set up the components in the orientation with the correct polarity (diode, one, transistors and capacitor)
The electret microphone is wired outside the circuit for psitionner the facade if you use this assembly in a box.
Supply the assembly with a 9V battery and actuate the switch. Snapping hands to control the relay. so shall control loads 230V, output cable should be in compliance with the electrical regulations.

 (5)    0

Your comment has been sent successfully. Thanks for comment!
Leave a Comment
Captcha